Start by going to Configuration > Networks
Edit or create the network where the guest policy should be applied
1 - Basic
Name - [Desired SSID name]
Type - Wireless
Primary usage - Guest
2 - VLAN
Client IP assignment - Virtual Controller managed
Client VLAN assignment - Default (unless specifically using VLANS)
3 - Security
Splash page type - External
Captive portal proxy server - leave empty
Captive portal profile - click plus
Type - RADIUS Authentication
IP or hostname - wifi.stampede.ai
URL - /{venue serial}
Port - 443
Use HTTPS - Checked
Captive Portal failure - Deny internet
Redirect URL - https://wifi.stampede.ai/{venue serial}/landing
WISPr - Unchecked
MAC authentication - Unchecked
Authentication server 1 - click plus
IP Address - found in the product
Auth port - 1812
Accounting port - 1813
Shared key = found in the product
leave everything else as is
Repeat above for secondary server
Reauth interval - 24 hours
Accounting - Use authentication servers
Accounting mode - Authentication
Accounting interval - 5