Setting up Your Draytek Integration

Rory

08 October 2024 08:49 Updated

Log in to your Draytek router and navigate to Hotspot Web Portal Profile Setup. Click an available index to create the profile.
Firstly enable the profile with the check box. Apply the following settings:

Portal Method: External Portal Server

Captive Portal URL: https://wifi.stampede.ai/*serial*
(You can find the serial by going to the product, into the hardware section. Once the vendor type is set to Draytek, you will see under the AAA RADIUS settings, the NAS ID. This is your serial)

Redirection URL: http://portal.draytek.com

Mac Address Format: "AA-BB-CC-DD-EE-FF"

RADIUS NAS-Identifier: *serial*
Enable both external RADIUS and Accounting and enter our RADIUS servers, and follow the details below:

All other settings are left as standard.
Next, head to the Hotspot Web Portal Profile Setup Whitelist Setting section. Under ,Dest Domain, add the following domains:

wifi.stampede.ai

34.249.196.234

52.208.193.150
Finally, go to the Web Portal Profile Setup More Options section. Apply here:

HTTPS Redirection: enabled

Captive Portal Detection: enable

Landing Page After Authentication: Fixed URL:
https://wifi.stampede.ai/*serial*/landing

Finally, apply these settings to the subnet or SSID you'd like to broadcast our service from.

Related articles