Setting up your TP-Link + Stampede Network

To get started, sign into your Omada controller.

Select the site on the top right that you want to apply the Stampede integration.

Click on settings on the bottom left and then navigate to ‘Authentication’ ‘RADIUS Profile’

Once in the RADIUS Profile section, click on ‘Create New RADIUS Profile’. Enter the following information to create a Stampede radius profile:

Name: Stampede

Authentication Server IP: 52.211.166.55

Authentication Port: 1812

Authentication Password: bxsecret

RADIUS Accounting: Enabled

Interim Update: Enabled

Interim Update Interval: 600

Accounting Server IP: 52.211.166.55

Accounting Port: 1813

Account Password: bxsecret

Once added, click on ‘Save’

Navigate to ‘Wireless Networks’ and create a guest network. If you already have a guest network, you can skip this step. Click on ‘Create New Wireless Network’ and enter the following information:

Network Name (SSID): Guest Network (Note: This can be anything you choose)

Guest Network: Enabled

Security: None

Navigate to ‘Authentication’ ‘Portal’. Within this section, click on ‘Create New Portal’ and add the following information:

Portal Name: Stampede Portal

Portal: Enabled

SSID & Network: Select the guest network

Authentication Type: External RADIUS Server

Authentication Timeout: 8 Hours

RADIUS Profile: Stampede

NAS ID: TP-Link

Disconnect Requests: Disabled

Authentication Mode: CHAP

Portal Customization: External Web Portal - https://wifi.stampede.ai/*SERIAL*

Landing Page: The Original URL

Once applied, click on ‘Apply’.

Within ‘Authentication’ ‘Portal’, click on ‘Access Control’ on the top of the page.

Within the Access Control page, enable ‘Pre-Authentication Access’ and click on the plus sign on the right-hand side.

A pop up should appear, click on ‘IP Range’ and select URL. You will need to do this for each URL that needs to be added to the Pre-Authentication Access. The following URLs are as follows:

wifi.stampede.ai

appleid.apple.com

appleid.cdn-apple.com

Once added, click on ‘Save’ and then ‘Apply’. You have now successfully added the Stampede integration to Omada TP-Link. Connect to the guest network and try it out.