Below is a list of config changes that are required for the Cloudtrax/ Plasma cloud integration with stampede to be a success.
Note: any reference to SERIAL, can be found by logging into stampede, going to the venue > wifi > hardware, then taking the serial/ NAS ID
SSID settings:
Enable: Yes
Visible: Yes
Authentication: No
Captive Portal:
Splash Page: On
Splash Page Configuration:
Splash Page Type: Hosted Remotely
Splash Page URL: https://wifi.stampede.ai/SERIAL
Splash Page Secret: You can put in anything, however this will need to match the secret added to stampede during the set-up.
Splash Page Authentication Type: RADIUS
Server Address 1: radius.stampede.ai
Server Address 2: radius-two.stampede.ai
server Secret: SERIAL
Use MAC address for password: No
Failed Authentication block: Default
Client Force Timeout: 2880 minutes
Walled Garden:
wifi.stampede.ai
34.249.196.234
52.208.193.150
The last config change, is client Isolation, which should be active. All other changes are network configuration changes that won't interfere with stampede.