This step-by-step test confirms whether the Stampede Captive Portal loads correctly and whether guests can browse the internet after logging in. Start by forgetting the network, reconnecting as a new user, and checking that the Stampede splash page appears automatically. After completing the login form, verify that normal internet access works. If any step fails, it indicates a network issue such as incorrect routing, firewall blocks, DNS problems, or missing walled garden entries, which must be resolved by your IT provider.
To check whether the Stampede Captive Portal is working, run this quick test using any smartphone or laptop.
Step-by-Step Test
Forget the network
On your device, forget the guest Wi-Fi network completely.Reconnect fresh
Join the guest Wi-Fi again like a new visitor.Wait for the Stampede splash page
The branded login page should appear automatically.
If it does not appear, this is usually a network routing or walled garden issue.Complete the login form
Enter details or choose your login method.Confirm internet access
You should now be able to browse normally.
If you can log in but have no internet, this is a firewall or gateway issue.Check the Stampede dashboard
Go to Guests to confirm your test user appears.
Understanding failures
Fails at Step 3:
The network is not redirecting traffic to Stampede.Fails at Step 5:
The Wi-Fi network is blocking routing after authentication.Fails at Step 6:
The controller is not sending authentication back to Stampede.
Your IT provider should review:
Firewall rules
DNS
VLAN routing
Walled Garden